Brass Deflector

Made out of high strength Delrin this will aid in deflecting the brass forward and will help from deforming the rear of the ejection port. it will also help in not deforming the brass as much if you reload. Comes with (2) 10-32 screws for mounting.

Brass Deflector $25

Firing Pin

To install: Simply drive the 3/32 roll pin almost all the way out of the bolt carrier group. The Roll pin is located at the very back of the carrier group. The firing pin will pull out of the back of the carrier group.

Chromoly Steel $35

Titanium $65

Spanner Wrench

This is a spanner wrench that is made perfect to fit the barrel nuts on the M17s. No more pliers to mark the nut when you need to remove the barrel.

Spanner Wrench $25

Bolt Buffer

Lost or damaged buffer? This is a direct replacement that will out perform the stock one. You want to make sure you do not shoot your rifle without one of these in place.

Bolt Buffer $5

Bolt Buffer 3 pk $12

Straight Front Cap

This Billet front cap requires that the upper is cut straight and either the barrel shortened or an extension added to the barrel sleeve.

Straight Front Cap $45

Customer Supplied Sling Lug Install

When you are having a full Mod done, you can send me a sling attachment of your choice and I will install it for you. Or contact me an I can buy it and install it. You will pay the cost of the part plus instillation.

Customer Supplied Sling Lug Install $30